CCNA Wireless Practice Test Results

Question 1
36% answer correctly
Which of the following correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?
The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.
The AP sends its certificate to the controller. The AP then authenticates the received Cisco WLC certificate as valid.
The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.
The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the RADIUS server.
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the controller.
Question 2
52% answer correctly
Which Extensible Authentication Protocol types are supported by the Cisco Unified Wireless Network?
EAP-TLS, PEAP-MSCHAPv2, and PEAP-GTC only
EAP-TLS, PEAP-MSCHAPv2, PEAP-GTC, LEAP, and EAP-FAST only
LEAP and EAP-FAST only
Any EAP supported by the RADIUS authentication server
Question 3
43% answer correctly
Which of the following best describes upfade in a multipath environment?
The multiple signal paths are weaker than they should be because the signals are out of phase with each other.
The signal is stronger than it should be because multiple signal paths are received twice at exactly the same time, which results in the multiple signals being in-phase.
Multiple signal paths are not sent at exactly the same time. The receiver receives a positive crest on the primary signal and a negative crest on the secondary signal.
The multiple signal paths are distorted and difficult to understand.