CCNA Wireless Practice Test Results

Question 1
36% answer correctly
Which of the following correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?
The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.
The AP sends its certificate to the controller. The AP then authenticates the received Cisco WLC certificate as valid.
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the controller.
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the RADIUS server.
The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.
The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.
Question 2
38% answer correctly
The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key. Which option shows the GUI path where you can check the connection status of that client?
Monitor > Clients
Security > Clients
Security > Advanced > Clients
WLANs > WLAN_ID > Advanced
Wireless > 802.11b/g/n > Clients
Question 3
28% answer correctly
What is an MBSSID?
A set of physical APs configured in a BSA to form cells that are controlled by a single controller
A virtual AP configured on a physical AP that share a single physical device, which is one half- duplex radio
The group of clients that are allowed to gain access to one or more SSIDs configured in an AP
The identified overlap area between two cells, which identifies the clients that are operating in that area at any given time