CCNA Wireless Practice Test Results

Question 1
36% answer correctly
Which of the following correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the RADIUS server.
The AP authenticates the received RADIUS server certificate as valid. The AP then sends its certificate to the controller.
The AP sends its certificate to the RADIUS server. The AP then authenticates the RADIUS certificate as valid.
The AP sends its certificate to the controller. The AP then authenticates the received Cisco WLC certificate as valid.
The AP authenticates the received Cisco WLC certificate as valid. The AP then sends its certificate to the controller.
The AP sends its certificate to the RADIUS server. The AP then authenticates the controller certificate as valid.
Question 2
52% answer correctly
Which Extensible Authentication Protocol types are supported by the Cisco Unified Wireless Network?
EAP-TLS, PEAP-MSCHAPv2, and PEAP-GTC only
EAP-TLS, PEAP-MSCHAPv2, PEAP-GTC, LEAP, and EAP-FAST only
LEAP and EAP-FAST only
Any EAP supported by the RADIUS authentication server
Question 3
38% answer correctly
The wireless network is using controller-based APs and version 7.0 MR1. The APs appear to be connected properly to the controllers. A wireless user near one of the APs reports that they are unable to connect to the network with their pre-shared key. Which option shows the GUI path where you can check the connection status of that client?
WLANs > WLAN_ID > Advanced
Security > Clients
Wireless > 802.11b/g/n > Clients
Security > Advanced > Clients
Monitor > Clients