Free Practice Tests | Practice Test Bank

Question 1

46% answer correctly

Which option is enabled by default on Cisco IOS and IOS XE routers?

	SSH server
	HTTP server
	SSH and HTTP server
	IPv6 and IPv4 unicast routing
	AAA console login authentication
	IPv4 unicast routing
	IPv6 unicast routing

Question 2

42% answer correctly

On Cisco IOS XR, for which purpose is the turboboot procedure used?

	Use the negotiation auto command in interface configuration mode to enable link auto-negotiation to ensure that devices that share a link segment are automatically configured with the highest performance.
	To boot the router into ROM Monitor mode
	To install and boot up a PIE
	To install the IOS XR software from scratch using the ROM Monitor mode
	To perform an ISSU
	To speed up the time it takes to boot up the IOS XR router
	The interface has no flow control configuration.
	The configuration supports only full-duplex operation.
	The range for MTU values is 64 bytes to 1518 bytes on the interface.
	Which of the following about 10/40/100 GigabitEthernet interface configuration on Cisco IOS XR is true?
	To install and boot up a SMU

Question 3

42% answer correctly

On Cisco IOS XR, for which purpose is the turboboot procedure used?

	To install and boot up a SMU
	To boot the router into ROM Monitor mode
	To install and boot up a PIE
	To install the IOS XR software from scratch using the ROM Monitor mode
	To speed up the time it takes to boot up the IOS XR router
	The configuration supports only full-duplex operation.
	Which of the following about 10/40/100 GigabitEthernet interface configuration on Cisco IOS XR is true?
	Use the negotiation auto command in interface configuration mode to enable link auto-negotiation to ensure that devices that share a link segment are automatically configured with the highest performance.
	The range for MTU values is 64 bytes to 1518 bytes on the interface.
	To perform an ISSU
	The interface has no flow control configuration.