Free Practice Tests | Practice Test Bank

Question 1

46% answer correctly

Which option is enabled by default on Cisco IOS and IOS XE routers?

	SSH and HTTP server
	SSH server
	HTTP server
	IPv6 unicast routing
	IPv6 and IPv4 unicast routing
	AAA console login authentication
	IPv4 unicast routing

Question 2

42% answer correctly

On Cisco IOS XR, for which purpose is the turboboot procedure used?

	The range for MTU values is 64 bytes to 1518 bytes on the interface.
	To speed up the time it takes to boot up the IOS XR router
	To install the IOS XR software from scratch using the ROM Monitor mode
	Use the negotiation auto command in interface configuration mode to enable link auto-negotiation to ensure that devices that share a link segment are automatically configured with the highest performance.
	The configuration supports only full-duplex operation.
	The interface has no flow control configuration.
	To boot the router into ROM Monitor mode
	To perform an ISSU
	To install and boot up a SMU
	To install and boot up a PIE
	Which of the following about 10/40/100 GigabitEthernet interface configuration on Cisco IOS XR is true?

Question 3

42% answer correctly

On Cisco IOS XR, for which purpose is the turboboot procedure used?

	To install the IOS XR software from scratch using the ROM Monitor mode
	The range for MTU values is 64 bytes to 1518 bytes on the interface.
	The interface has no flow control configuration.
	To install and boot up a PIE
	To boot the router into ROM Monitor mode
	The configuration supports only full-duplex operation.
	Use the negotiation auto command in interface configuration mode to enable link auto-negotiation to ensure that devices that share a link segment are automatically configured with the highest performance.
	Which of the following about 10/40/100 GigabitEthernet interface configuration on Cisco IOS XR is true?
	To install and boot up a SMU
	To perform an ISSU
	To speed up the time it takes to boot up the IOS XR router