RP/0/RSP0/CPU0:PE1(config)# router static | |
RP/0/RSP0/CPU0:PE1(config)# telnet ipv4 server max-servers 20 | |
RP/0/RSP0/CPU0:PE1(config)# line console 0 | |
RP/0/RSP0/CPU0:PE1(config)# username CISCO password LAZ | |
RP/0/RSP0/CPU0:PE1(config)# vrf default |
BPDU messages exchanged with neighbor bridges | |
Dynamic routing protocol updates from neighbor bridges | |
STP messages exchanged with neighbor bridges | |
Analysis of the source MAC address of incoming frames on the bridge ports |
One root port exists per broadcast domain. | |
One root bridge exists per collision domain. | |
One designated port is defined per segment. | |
Non-designated ports are set in the forwarding state. | |
One root port is established per root bridge. |