CCNA Routing and Switching Practice Test Results

Question 1
56% answer correctly
You are working in a data center environment and are assigned the address range 10.188.31.0/23. You are asked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hosts each. Which IP address range meets these requirements?
10.188.31.0/25
10.188.31.0/26
10.188.31.0/27
10.188.31.0/28
10.188.31.0/29
Question 2
35% answer correctly
Which IPv6 address is valid?
2031::130F::9C0:876A:130B
2031:0:130F::9C0:876A:130B
2001:0db8:0000:130F:0000:0000:08GC:140B
2001:0db8:0:130H::87C:140B
Question 3
46% answer correctly
A router is running three routing processes: RIP, OSPF, and EIGRP, each configured with default characteristics. Each process learns a route to the same remote network. If there are no static routes to the destination and none of the routes were redistributed, which route will be placed in the IP routing table?
The route with the lowest metric
The route learned through OSPF
The route learned through RIP
All three routes with the router load balancing
The route learned through EIGRP