CCNA Routing and Switching Practice Test Results

Question 1
33% answer correctly
Which address is the IPv6 all-RIP-routers multicast group address that is used by RIPng as the destination address for RIP updates?
FF05::101
show session
show vty logins
FF02::9
FF02::A
show users
Which command shows your active Telnet connections?\r\n
show cdp neigbors
FF02::6
Question 2
56% answer correctly
You are working in a data center environment and are assigned the address range 10.188.31.0/23. You are asked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hosts each. Which IP address range meets these requirements?
10.188.31.0/25
10.188.31.0/26
10.188.31.0/29
10.188.31.0/27
10.188.31.0/28
Question 3
30% answer correctly
The network administrator is asked to configure 113 point-to-point links. Which IP addressing scheme best defines the address range and subnet mask that meet the requirement and waste the fewest subnet and host addresses?
10.10.1.0/24 subnetted with mask 255.255.255.252
10.10.0.0/18 subnetted with mask 255.255.255.252
10.10.0.0/16 subnetted with mask 255.255.255.252
10.10.0.0/23 subnetted with mask 255.255.255.252
10.10.1.0/25 subnetted with mask 255.255.255.252