CCNA Routing and Switching Practice Test Results

Question 1
33% answer correctly
Which address is the IPv6 all-RIP-routers multicast group address that is used by RIPng as the destination address for RIP updates?
show users
show vty logins
FF02::6
show cdp neigbors
FF02::9
Which command shows your active Telnet connections?\r\n
show session
FF05::101
FF02::A
Question 2
56% answer correctly
You are working in a data center environment and are assigned the address range 10.188.31.0/23. You are asked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hosts each. Which IP address range meets these requirements?
10.188.31.0/27
10.188.31.0/29
10.188.31.0/25
10.188.31.0/26
10.188.31.0/28
Question 3
46% answer correctly
A router is running three routing processes: RIP, OSPF, and EIGRP, each configured with default characteristics. Each process learns a route to the same remote network. If there are no static routes to the destination and none of the routes were redistributed, which route will be placed in the IP routing table?
All three routes with the router load balancing
The route with the lowest metric
The route learned through EIGRP
The route learned through OSPF
The route learned through RIP